Substitute Natural Gas (SNG) Is A Gaseous Mixture Containing CH4(g) That Can Be Used As A Fuel. One Reaction (2024)

Answer:

D) The attractive force decreases as the atom gets larger.

Explanation:

i did the lesson and tried all 3, all 3 times, this was the last one and only choice left so it has to be.

Answer:

The attractive force decreases as the atom gets larger.

Explanation:

Answer:

Explanation:

2.1>1000

?>500

(500×2.1)÷1000=1.05moles

Mass= molesx molar mass

1.05×(56+32+(16×4))

1.05×152=159.6g

Answer:

a)0.765 g

b)7.613 g

c)0.20 L

Explanation:

Consider the reaction involved;

Na(s) + HNO3(aq) ----> NaNO3(s) + H2(g)

Note that, if a hot, saturated aqueous solution of sodium nitrate was allowed to cool, solid sodium nitrate would crystallise out of the solution and this would also be classed as a precipitate. This is the case here.

Number of moles of sodium reacted= mass of sodium reacted/ molar mass of sodium

Number of moles of sodium= 7.85g/23gmol-1

Number of moles of sodium= 0.34 moles of sodium

Number of moles of acid reacted= concentration of acid × volume of acid

Number of moles of acid= 0.0450 × 200/1000

Number of moles of acid= 9×10^-3 moles

Therefore, HNO3 is the limiting reactant.

1 mole of HNO3 yield 1 mole of NaNO3

9×10^-3 moles of HNO3 yield 9×10^-3 moles of NaNO3

Hence mass of NaNO3= number of moles × molar mass

Mass of NaNO3= 9.0×10^-3 moles × 84.9947 g/mol

Mass of NaNO3= 0.765 g of NaNO3

b)

Since

1 mole of sodium metal reacts with 1 mole of HNO3

9×10^-3 moles of sodium reacts with 9×10^-3 moles of HNO3

Therefore amount of unreacted sodium metal = 0.34 moles - 9×10^-3 moles = 0.331 moles

Mass of unreacted sodium metal = 0.331 moles × 23 gmol-1= 7.613 g

c)

If 1 mole of HNO3 yields 1 mole of hydrogen gas

9×10^-3 moles of HNO3 yields 9×10^-3 moles of hydrogen gas.

1 mole of hydrogen gas occupies 22.4 L

9×10^-3 moles of hydrogen gas will occupy 9×10^-3 moles × 22.4/1 = 0.20 L

Answer:

They form K₂O (Potassium oxide) and HCl (Hydrochloric acid). This is because K and H are positively charged and O and Cl are negatively charged and cations only bond with anions.

Answer: Aluminum Carbonate

Explanation:

Answer:

Aluminum carbonate.

Explanation:

It is an aluminum salt form of carbonic acid.

Answer:

The reaction of an acid and a base is called a neutralization reaction. ... However, in the reaction between HCl(aq) and Mg(OH) 2(aq), additional molecules of HCl and ... First, we will write the chemical equation with the formulas of the reactants ... The chloride ions are the only spectator ions I THINKS

Explanation:

Answer: 1.29 moles of ethylene glycol must be added to 1 kg of water to make a solution with a freezing point of -2.4°C. Molality of solution is 1.29 m.

Explanation:

Depression in freezing point is given by:

[tex]\Delta T_f=i\times K_f\times m[/tex]

[tex]\Delta T_f=T_f^0-T_f=(0-(-2.4))^0C=2.4^0C[/tex] = Depression in freezing point

i= vant hoff factor (for non electrolyte , i = 1)

[tex]K_f[/tex] = freezing point constant for water= [tex]1.86^0C/kgmol[/tex]

m= molality =[tex]\frac{\text{moles of solute}}{\text{weight of solvent in kg}}[/tex]

m= molality =[tex]\frac{x}{1kg}[/tex]

[tex]2.4^0C=1\times 1.86^0C/kgmol\times \frac{x}{1kg}[/tex]

[tex]x=1.29[/tex]

Molality = [tex]\frac{\text{moles of solute}}{\text {weight of solvent in kg}}=\frac{1.29mol}{1kg}=1.29m[/tex]

Thus 1.29 moles of ethylene glycol must be added to 1 kg of water to make a solution with a freezing point of -2.4°C. Molality of solution is 1.29 m.

Answer:

1) C (m=T f/Kf)

2) 2.4 C

3) 1.3 m

4) 1.3 moles

Explanation:

This is correct on ed

Answer:

The balanced equation is: 2AgNO₃ + MgCl₂ ------> 2AgCl + Mg(NO₃)₂

Explanation:

The law of conservation of mass states that in a normal chemical reaction, matter is neither created nor destroyed.

According to the law of conservation of mass, therefore, when a chemical reaction occurs, the mass of the products should be equal to the mass of the reactants. This implies that the amount of the atoms in each element in the chemical reaction remains the same before and after the reaction. A balanced chemical equation therefore, is one that shows that the number of the atoms involved in the reactants side is equal to the number of atoms in the products side.

Considering the given reaction:

2AgNO₃ + MgCl₂ ------> 2AgCl + Mg(NO₃)₂

The amount in moles of each atom in the reaction is as follows;

Ag = 2 moles of atom on each side

N = 2 moles of atoms on each side

O = 6 moles of atoms on each side

Mg = 1 mole of atoms on each side

Cl = 2 moles of atoms on each side

Therefore, the above chemical equation is balanced.

Answer:

The equation is already balanced.

Explanation:

Options are not given in the question. The complete question is as follows:

Read the following statements carefully: X: It is a thick black coloured liquid which is obtained from coal.Y: It was used earlier in railway engines to produce steam to run trains.Z : It is used to run heavy vehicles such as buses, trucks, tractors, etc.X, Y and Z respectively are

A. a. Coal tar b. Coal c. Diesel

B. a. Coal b. Paraffin wax c. Petrol

C. a. co*ke b. Coal tar c. Kerosene

D. a. co*ke b. Coal c. Coal tar

Answer:

A. a. Coal tar b. Coal c. Diesel

Explanation:

Coal Tar is a thick black or dark brown colored liquid obtained from coal. Coal Tar consists of hydrocarbons and free carbon extracted from coal using a process of destructive distillation. So, X is coal tar.

Earlier coal was used to produce steam to run steam engine trains. Air flows are allowed to burn coal hotter, then the hot coal turns water to steam and helps in the locomotive steam engine to run. So, Y is coal.

Deisel is used to run heavy vehicles such as buses, trucks, tractors, etc. because diesel burns at slow speed and produces a higher torque that can move heavy automobiles. So, Z is deisel.

Hence, the correct option is A.

Answer:

33.5 g/mol

Explanation:

PV=nRT

(1.40 atm)(8.00 L)=n(0.08206)(295 K)

n=0.463 mol

15.50 g/0.463 mol=33.5 g/mol

Answer:

Did you mean solution??

In chemistry, a solution is considered as a special type of hom*ogeneous mixture composed of two or more substances. In such a mixture, a solute is a substance dissolved in another substance, known as a solvent.

Eg: sweet tea or coffee (sugar added to solution)

bleach (sodium hypochlorite dissolved in water)

HOPE IT HELPS :)

Answer:

La B

Explanation:

It's B on Ap3x

Straight away from the source

Answer:

So, the atomicity of noble gases is 1. Example. ... So, the atomicity of hydrogen, nitrogen, oxygen, chlorine, bromine and iodine is 2 each.

Explanation:

So, the atomicity of noble gases is 1. Example. ... So, the atomicity of hydrogen, nitrogen, oxygen, chlorine, bromine and iodine is 2 each.

could help

Answer:

The volume of a gas is determined by the volume of the container it is in. Gases take the shape of their container and the volume of the container....

Explanation:

What happens to the volume or size of a balloon as it rises in the air?

When a balloon goes up higher in the air, its size will increase. Since there's less air in the upper atmosphere, there's less stuff pushing back on the balloon, and hence the pressure is lower, which allows the balloon to expand.

Is pressure inside a balloon greater?

The pressure inside the balloon is higher than the pressure on the outside. ... And the direction of airflow is always from higher to lower pressure. If the pressure was same then there would be no airflow and if the pressure outside was higher , air will flow from outside to the inside of the balloon.

What is the relationship between volume and pressure?

Boyle's law is a gas law, stating that the pressure and volume of a gas have an inverse relationship. If volume increases, then pressure decreases and vice versa, when temperature is held constant. Therefore, when the volume is halved, the pressure is doubled; and if the volume is doubled, the pressure is halved.

Mark as brainliest if liked it. Thanks hope this helps

Answer:

It would have to be D, a bent shape

Explanation:

I just took the quiz

Answer:

Alcohol

Structure: Alcohols are organic molecules assembled from carbon (C), oxygen (O), and hydrogen (H) atoms.

Property: The Boiling Point of Alcohols. Alcohols generally have higher boiling points in comparison to other hydrocarbons having equal molecular masses.

Aldehyde

Structure: DescriptionAn aldehyde is a compound containing a functional group with the structure −CHO, consisting of a carbonyl centre.

Property: The polarity of the carbonyl group notably affects the physical properties of melting point and boiling point, solubility, and dipole moment.

Ketone

Structure: A ketone is a functional group with the structure RC(=O)R', where R and R' can be a variety of carbon-containing substituents.

Property: Ketones are soluble in water but their solubility decreases with increase in the length of the chain.

Fatty Acid

Structure: a fatty acid consists of a straight chain of an even number of carbon atoms, with hydrogen atoms along the length of the chain and at one end of the chain and a carboxyl group (―COOH) at the other end.

Property: Fatty acids are solid at room temperature, while unsaturated fatty acids are liquid.

Ether

Structure: a class of organic compounds characterized by an oxygen atom bonded to two alkyl or aryl groups.

Property: An ether molecule has a net dipole moment due to the polarity of C-O bonds.

The functional group associated with ethanol is -OH, the aldehyde is -COH, the ketone is -CO, the fatty acid is -COOH, and ether is ROR.

The functional groups have been the atoms that have different constituents and properties with respect to other groups.

The functional group associated with the following groups has been:

Alcohol: It has been liquid at room temperature with the functional group -OH.

Aldehyde: It has been soluble in water with the functional group -COH.

Ketone: It has been soluble in water, with C=O in the structure as a functional group.

Fatty acid: It has been a long chain acid, with the presence of carboxylic group -COOH.

Ether: It has been the pleasant smelling compounds with the presence of the R-O-R group as the functional group.

The functional group associated with ethanol is -OH, the aldehyde is -COH, the ketone is -CO, the fatty acid is -COOH, and ether is ROR.

For more information about the functional group, refer to the link:

https://brainly.com/question/24378712

Answer:

1) potential energy of the bond.

2) Linear

3) The electrons are transferred from K to Cl.

4) ClF

5) Oxygen

6) Electrolysis

7) Double displacement

Explanation:

As two atoms approach each other in a bonding situation, the potential energy of the bond is minimized as the internuclear distance of the bonding atoms decreases.

BeH2 has two electron domains and the central beryllium atom is sp2 hybridized. According to valence shell electron pair repulsion theory. A molecule having two regions of electron density will lead to a linear molecule.

KCl is an ionic compound hence there is a transfer of electrons from K(metal) to Cl(nonmetal).

ClF has partial charges because it contains a polar covalent bond. The partial charges arise from the dipole within the molecule. LiF is a pure ionic compound formed by transfer of electrons from Li to F. The species possess full and not partial charges.

When an oxygen atom bonds with another oxygen atom, what has been formed is a hom*onuclear covalent bond. Since the electro negativity of the both atoms is exactly the same, a pure covalent bond is formed. Recall that polar covalent bonds are formed when there is a significant electro negativity difference between the bonding atoms.

When direct current is passed through certain salt solutions during electrolysis, gases may be evolved and collected at the appropriate electrodes.

A double-replacement reaction is a reaction in which the cations and anions present in two different ionic compounds that are reacting together exchange their positions to form two new compounds on the product side. For instance, look at the reaction shown in question 7 as a typical example of this;

AgNO3 (s) + NaCl (s) → AgCl (s) + NaNO3 (s).

Answer:

THE NORMAL BOILING POINT OF A SOLUTION CONTAINING 64.5 g OF QUINOLINE IN 500 g OF BENZENE IS 82.6 C

Explanation:

Boiling point = old boiling point + molarity * boiling point constant (Kb)

First, you calculate the number of moles of quinoline in the solution

number of moles = mass / molar mass

Since the molar mass of quinoline has been given as 129 g/mol

number of moles = 64.5 g / 129 g/mol

number of moles = 0.5 moles.

Next is to determine the molarity:

molarity = number of moles of solute / kilogram of solvent

molarity = 0.5 moles / 500/1000 kg

molarity = 0.5 / 0.5

molarity = 1 M

The new boiling point can then be calculated using the formula:

B. P = old B.P + Kb * molarity

B.P = 80.10 + 2.50 * 1

B.P = 80.10 + 2.50

B.P = 82.6 degree celsius

Answer:

The new volume is 1,000ml

Explanation:

Mathematically, we know that the number of moles per ml(volume) should be constant irrespective of the increase.

Initially, we have a volume of 500 ml and number of moles of 2.5 moles

The ratio of the number of moles to the volume is 2.5/500 = 0.005 mole/ml

Now, this is expected to remain the same even if we have an increment.

let’s call the new volume x

0.005 mol/ml = 5 moles/x ml

x = 5/0.005 = 1,000 ml

Answer:

False

Explanation:

Catalysts are reusable because they keep the chemical reactions moving without being consumed.

A) 4

pH=-log[H+]

pH=-log(10^-4)

B) Weaker

pH of orange juice=4

pH of coffee=5

An acid with pH of 4 is stronger than a pH of 5

C) 7, neither/neutral

pH of water=7

Answer:

Explanation:

In case of Water there are strong hydrogen boding excist as result shows high boiling point, wher as in case of methane the there is no hydrogen bond and excist weak vanderwall attraction between the molcuels so the lower boiling point.

Answer:

Ancient CO₂ levels can be measured from

1) Air bubbles trapped in deep ancient ice cores (up to 800,000 years ago) or

2) Tree rings (up to 10,000 years ago)

Explanation:

The percentages of CO₂ concentration in the atmosphere from previous or ancient times are found by analyzing the CO₂ content in trapped air located in the deep ancient ice cores present in Antarctica and Greenland such as the EPICA Dome C cores

As the ice is drilled though, the air released from trapped bubbles are captured for analysis and the time frame for the captured bubbles can date back up to 800,000 years

Ancient CO₂ levels can also be measured from tree rings which provide ancient CO₂ levels up to 10,000 years

Answer:

Glucose and oxygen is produced during photosyntheis

Explanation:

Carbon dioxide and water are required for photosyntheis producing oxygen and glucose

Answer:

C.Glucose and oxygen

The answer is II. Oxygen, IV. Sulfur, and V. Selenium.

Explanation:

Going down the list that was provided, we can use the periodic table of elements to determine the valence electrons.

- Nitrogen has 5 valence electrons
- Oxygen has 6 valence electrons
- Fluorine has 7 valence electrons
- Sulfur has 6 valence electrons
- Selenium has 6 valence electrons

Since oxygen, sulfur, and selenium all have 6 valence electrons, then that is the correct answer.

Answer:

gold

Explanation:

Answer:

whole continents can move.

Answer:

[tex]\large \boxed{\text{-92 $^{\circ}$C}}[/tex]

Explanation:

We can use the Ideal Gas Law and solve for T.

pV = nRT

Data

p = 1.25 atm

V = 25.0 L

n = 2.10 mol

R = 0.082 06 L·atm·K⁻¹mol⁻¹

Calculations

1. Temperature in kelvins

[tex]\begin{array} {rcl}pV & = & nRT\\\text{1.25 atm} \times \text{25.0 L} & = & \rm\text{2.10 mol} \times 0.08206 \text{ L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times T\\31.25&=&0.09847T\text{ K}^{-1}\\T& = &\dfrac{31.25}{\text{0.098 47 K}^{-1}}\\\\& = &\text{181 K}\end{array}[/tex]

2. Temperature in degrees Celsius

[tex]\begin{array} {rcl}T & = & (181 - 273.15) \, ^{\circ}\text{C}\\& = & -92 \, ^{\circ}\text{C}\\\end{array}\\\text{The temperature of the gas is $\large \boxed{\mathbf{-92 \, ^{\circ}}\textbf{C}}$}[/tex]